Description | Parameter |
X,Y,Z Working Area | 400*400*120mm |
X,Y,Z Traveling Positioning Accuracy | ±0.03 |
X,Y,Z Repositioning Accuracy | ±0.03mm |
Table Surface | T-slot Table |
Frame | cast by iron |
X, Y,Z Structure | Hiwin Rail Linear Guide and ball screw |
Max. Power Consumption | (Without Spindle) 1.0Kw |
Max. Rapid Travel Rate | 15m/min |
Max. Working Speed | 8m/min |
Spindle Power | 1.5KW water cooling spindle/2.2kw for optional |
Spindle Speed | 0-24000RPM |
Drive Motors | Stepper Motor/Servo Motor |
Working Voltage | AC220/380V/50/60Hz,3PH |
Command Language | G Code |
Operating System | DSP System (Options: Ncstudio/Mach3 PC Software) |
Computer Interface | USB |
Flash Memory | 128M(U Disk) |
X,Y Resolution | <0.01mm |
Software Compatibility | Type3/UcancameV9 Software, (Option: Artcam Software) |
Running Environment Temperature | 0 - 45 Centigrade |
Relative Humidity | 30% - 75% |
Inverter | Delta/Fuling |
Electrical components | Schneider |
Limit switch | OMRON |
Driver | Leadshine or Yako |
